1000mm Locking Mechanism Drawer Slide
video
1000mm Locking Mechanism Drawer Slide

1000mm Locking Mechanism Drawer Slide

Brand Name: HVPAL
Material: Cold Rolled Steel
Model Number: HA7603
Finish: Clear Zinc Electroplate
Loading capacity: 227KG/450MM(18'')
Height: 76mm
Length: 10"-60" (254-1524mm)
Application: Kitchen, Industrial drawers, Outdoor, Office Building, Hospital, Mall, Sports

Description

1000mm Locking Mechanism Drawer Slide

 

The full-extension design allows the drawer to be pulled out completely, providing 100% access to the entire interior space. This feature eliminates the hassle of reaching for items stored at the back of deep drawers, greatly improving work efficiency and convenience-perfect for camping trailers where every inch of storage space is valuable, and quick access to cooking tools, outdoor gear, or emergency supplies is essential.
 

 

76mm locking mechanism drawer slide

3-Fold Slides. Enable the slides to extend fully. increasing storage space

locking heavy duty drawer slide‌

Made from 2.5mm thick cold rolled steel. Use 5% salt spray for 48 hours to make it more resistant to wear and corrosion

ball-bearing drawer slide

The ball-bearing action can create a quiet environment at work.

locking 76mm drawer slide

Nylon buffer can reduce the direct contact between the outer and the inner channel.

APPLICATIONS
product-800-533
product-800-533
product-599-461
product-599-461

Installation and Usage Notes
1. Installation Tips
The left and right sliding rails must be parallel and of the same height. They must be calibrated using a level ruler. Installation must be done perfectly straight. Any skew installation will cause jamming, uneven loading, and rapid damage.
A 30% safety margin is reserved for load-bearing. The total load must not exceed the rated load capacity of the sliding rails. Overloading is strictly prohibited.
For RV / vehicle-mounted vibration scenarios: All screw holes must be fully filled with screws, and additional reinforcing washers must be installed to prevent loosening and detachment.
The depth of the drawer must match the length of the sliding rail, and a 10mm gap must be reserved to avoid the front and rear being jammed and stuck.
Use M5 high-strength flange screws for fixation. Poor-quality self-drilling screws must not be used for long-term heavy loads.
For lockable models, violent pulling is strictly prohibited. Unlock first before pulling to avoid lock mechanisms breaking.
 

Hot Tags: 1000mm locking mechanism drawer slide, China 1000mm locking mechanism drawer slide manufacturers, suppliers, factory, cabinet slide rails, 96 inch drawer slides, recessed drawer runners, matco drawer slides, undermount cabinet drawer slide, Heavy Duty Drawer Slides

You Might Also Like

Shopping Bags