Stainless Steel Slide Rail

HA5301 stainless steel full extension ball bearing heavy-duty drawer slide runners

53Mm wide stainless steel slide that can carry up to 115KG.
Compared with ordinary steel slide, this is different from the material, this slide uses stainless steel as a raw material, greatly improving the performance of the slide on the basis of the original, generally in the kitchen we usually see stainless steel products, because it can be a good way to avoid long-term water corrosion, but also extend the service life of the slide.
The steel plate thickness of the slide is 2.0MM, and this design is the key to the load-bearing capacity of the slide. Can meet the needs of most customers for storage
 

3-Fold Slides. Enable the slides to extend fully. Suitable for industrial drawers, safety drawers, exhibition drawers, and heavy truck drawers.

Constructed with 2.0 mm thickness cold-rolled steel. By using 5% salt spray for 48 HRS.

The ball-bearing action can create a quiet environment at work.

Nylon buffer can reduce the direct contact between the outer and the inner channel.

Brand Name	HVPAL	Material	Stainless Steel
Model Number	HA5301	Finish	Clear Zinc Electroplate
Loading capacity	125KG/450MM(18'')	Height	53mm
Length	10"-60" (250-1500mm)	Application	Kitchen, Industrial drawers, Outdoor, Office Building, Hospital, Mall, Sports

 

APPLICATIONS

The installation of the stainless steel slide is not difficult, and can be carried out according to the following steps:

1. ** Measurement and marking ** : First, it is necessary to accurately measure the depth and width of the drawer opening, and determine the amount of clearance required for the slide rail. Mark the location of the slide rails on drawers and cabinets or furniture.

2. ** Choose the right size ** : According to the length of the drawer and the depth of the cabinet, determine the correct size of the required slide, and consider the load-bearing capacity of the slide.

3. ** Install the slide rail ** : Install the outer rail and middle rail of the slide rail on both sides of the drawer box first, and then install the inner rail on the side panel of the drawer. If it is finished furniture, the pre-drilled holes in the box of the drawer and the side panel of the drawer are easy to install, and they need to be drilled by themselves.

4. ** Adjust the level ** : When installing the slide rail, it is recommended to assemble the drawer as a whole, there are two holes on the track for adjusting the upper and lower and front and rear distances of the drawer, while ensuring that the left and right slide rails are in the same horizontal position.

5. ** Fixed slide ** : Use screws to fix the inner rail to the chest of drawers and ensure that the inner rail on both sides is horizontal and parallel.

6. ** Test slide ** : After installation, pull the drawer to try, if there is a problem, it needs to be re-adjusted, and the drawer can be installed smoothly.

7. ** Final adjustment ** : Pull out and push the drawer several times to ensure that the drawer slides smoothly without loosening or sticking, and check the fixing screws of the slide rail to ensure that all screws are fastened in place.

To sum up, installing stainless steel slides is a relatively simple process, as long as the correct steps and precautions are followed, even people who do not have much experience can complete the installation. Of course, if you have less experience, you can also hire an experienced master to install, or refer to the installation video on the network.

Hot Tags: stainless steel slide rail, China stainless steel slide rail manufacturers, suppliers, factory, light duty drawer slides, white drawer slides, 5 drawer slides, 48 heavy duty drawer slides, 72 heavy duty drawer slides, server rack drawer slides