How To Install The Drawer Slide Rail

Furniture slideways, also known as furniture rails and furniture slideways, belong to a hardware connection component. The purpose of the furniture slide is to fix the cabinet body of the furniture, allowing the cabinet board or drawer of the furniture to move in and out. Therefore, furniture slideways are widely used in the fields of document cabinets, furniture, cabinets, bathroom cabinets, etc., mainly for connecting drawers of steel or wooden furniture. So, what are the manufacturers of furniture slide rails?

The drawer slide can be divided into three parts, the outer rail, the middle rail, and the inner rail. The installation of the drawer slide requires the inner rail to be removed first. The method of dismantling it is also very simple. Behind the drawer slide, there is a spring clip. The inner rail can be removed with just a slight press. It should be noted that the middle rail and outer rail cannot be forcibly removed. Install the outer and middle rails of the slide onto both sides of the drawer insert. Install the rail on the side panel of the drawer. If it is a finished product, it is necessary to punch holes in the inlay and drawer side panels of the finished product. After connecting the insert of the outer rail and the middle rail, check whether the right rail is in the same horizontal position. If not, reinstall it and balance the left and right sides. so what? Install the inner and outer rails at the measured position and fix the inner rails on the cabinet body with screws. Tighten the screws, but note that the inner rails on both sides are horizontal and parallel. If there is a jam during push back, be sure to check whether the two positions of the inner and outer rails match? Adjust well until it can be smoothly advanced. After installation, what will happen? Pull things, try the drawer, and wait until the drawer is smooth, it's already installed.