Lock heavy duty drawer slide and non lock

Full extension 227KG load capacity heavy duty drawer slide 

 

The 76mm-wide heavy-duty slide rail heavy duty drawer slide, a benchmark for industrial-grade slides, offers the following key advantages:

1. Superior Load-Bearing Capacity
220kg Load Capacity: Utilizing 2.5mm thickened cold-rolled steel, it boasts a rated load capacity of 220-230kg and resists deformation even after long-term use. This provides support for applications requiring high loads.

Because of its larger width, the rail's load-bearing capacity is increased, making it ideal for heavy equipment such as motors and tool cabinets.

2. Precision Construction and Durability
Dynamic Steel Ball Coupling: The three-section design distributes pressure at multiple points for smooth linear motion, maintaining smooth operation even after 80,000 push-pull cycles.

Long-Lasting Rust Resistance: Utilizing a zinc plating process, the rail resists rust in humid environments, ensuring safe outdoor use in rainy and humid weather, significantly extending its lifespan.

3. Functional Adaptability
Safety Lock: The locking version allows for full extension, preventing accidental sliding during bumpy driving. A must-have for RVs and outdoor vehicles. Space Optimization: The side-mounted structure saves 40% of installation space and accommodates ultra-long travel requirements up to 2000mm.

 

Choosing Slides: Drawer slides are a common hardware accessory in home decoration. Common sizes include 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, and 20 inches, and custom sizes are available upon request. When choosing a drawer slide, consider the type, specific gravity, surface treatment, structural material, and serviceability. Drawer slides primarily come in three types: base, ball bearing, and roller. When selecting, assess specific gravity by comparing weights of units of the same length or volume. Observe the quality of the surface treatment, check the cross-sectional thickness and structure of the metal material, and test the stretch and weight during testing. Furthermore, three-section slides are more convenient than two-section slides because drawers can be fully extended. Ball bearing slides offer uniform force distribution, smooth push-and-pull operation, and quiet cushioning, making them a popular choice.

 

Below are the detailed information about HA7613 heavy duty slide rails HA7613 550MM drawer slide

 

Mounting	Side mount
Loading rate	227kgs/ pair 18 inch
Max length	80 inch
Traveling	100% full extension
Install spalce	19.1mm each side
Inner connection	Non-disconnected
Finish	Clear Zinic
Size available	10 in, 12 in, 14 in, 16 in, 18 in....80 inch

We can choose whether the slide rail has a locking function according to our actual needs. The slide rail with a locking function is more suitable for mobile vehicles such as campers. This slide rail can reduce the damage to items caused by bumps in the car.

 

As an essential outdoor hardware accessory, how should we choose and purchase high-quality slide rails?
First, we need to determine our needs and select a slide rail length appropriate for the size of our storage space. Generally, 76mm wide heavy-duty slide rails can support 227kg per pair. Each layer of the rails should be 2.5mm thick. If the rails are not thick enough, the load-bearing capacity will be reduced. This is important to note.

 

Installing drawer slides typically requires the following tools:

1. Screwdriver: Used to tighten screws and secure the slides.

2. Tape measure or ruler: Used to accurately measure the dimensions of the drawers and cabinets and determine the installation location for the slides.

3. Pencil or marker: Used to mark the mounting hole locations for the slides on the drawers and cabinets.

4. Electric drill or hand drill: Used to drill holes for screws to secure the slides.

5. Level: Used to ensure the slides are level and prevent the drawers from tilting and affecting operation.

6. Clamps: Used to secure the slides in place during installation and facilitate accurate alignment.

7. Drill bit: Used with a drill to drill holes in drawers and cabinets.

8. Screws: Used to secure the slides to the drawers and cabinets. Screws are usually included with the slides, but sometimes you may need to purchase matching screws separately.

These tools and materials are essential for installing drawer slides and ensure a smooth installation.

 

76mm wide heavy-duty drawer slides, with their high load capacity and industrial-grade durability, are widely used in the following areas:

1. Industrial Manufacturing

Heavy Equipment Cabinets

CNC Machine Tool Control Cabinets: Dynamic load capacity 500kg

Welded Robot Arm Base: Sandwich structure design increases deformation resistance by 3 times and reduces maintenance costs by 85%

Warehouse and Logistics Systems

Automated High-Rise Warehouse Shelves: Three-section rail design increases drawer travel by 30%, and zinc-nickel alloy surface is rust-resistant

E-commerce Sorting Equipment: Intelligent damping system reduces cargo collision by 5% 0%
II. Vehicle Modifications
RV/Camper
Kitchen Cabinet: 250kg load capacity, supports a full tank of mineral water, and its ultra-thin 19mm design saves space
Solar Panel Mount: Anti-drop lock ensures driving safety

Fire Truck
Equipment Drawer: Lockable design prevents accidental opening in emergencies
III. High-End Equipment and Public Facilities
Medical Equipment

CT Scanner Bed; Surgical Instrument Cabinet

IV. Innovative Application Scenarios
Smart Home: Industrial-style heavy-duty dining table with 76mm slide rails combines aesthetics and functionality

Heavy-duty slides are widely used and are favored by many customers.

 

 

We are a hardware accessories company with rich experience in producing slide rails. We have been engaged in this industry for more than ten years. Our company is equipped with professional technicians and production teams.